Disclaimer: due to a complaint from the citizens of my native city in Italy… I had to rename #PiadinaBoard into #BurtleinaBoard 😛
Few months ago I have presented #FocacciaBoard: a similar multipurpose breakout board that uses the famous FT232H to handle multiple protocols commonly found in (I)IoT devices (i.e. UART, JTAG, SWD, SPI, I2C).
Despite FocacciaBoard is extremely useful during my night-to-night hardware hacking needs… there is another set of tools I cannot live without: pin enumeration ones. The two most used are JTAGulator (awesome commercial product developed by Joe Grand) and BUSSide (a marvelous piece of FOSS developed by Dr. Silvio Cesare).
BUSSide is exactly what you need if you don’t feel comfortable yet to spend yet 160€ for the JTAGulator (which I heavily recommend once you will improve your Hardware Hacking skills and start targeting complex devices).
That’s why I created#BürtleinaBoard: to have a more usable breakout-board around BUSSide software framework.
BUSSide is a software framework developed for ESP8266 , running on a NodeMCU board which allows a python client on your laptop to communicate (mostly through bit-banging) with different hardware components through different protocols (i.e. UART, SPI, I2C and JTAG).
What makes BUSSide an irresistible toy to always have around in your hardware hacking lab is that has the capability to discover/enumerate the right pins for multiple protocols.
Imagine the scenario where you have target with exposed some debug pins or test points… but there is anything written on the silk-screen that may help you figure out what is what. What do you do?
Flashing BUSSide firmware inside the NodeMCU is quick and easy:
# apt-get install esptool
# git clone http://github.com/BSidesCbr/BUSSide.git
# esptool --port /dev/ttyUSB0 write_flash 0x00000 BUSSide/FirmwareImages/*.bin
Of course, you can also use esptool on Windows or Nodemcu-flasher
Once flashed, you can attach the NodeMCU on the BürtleinaBoard and then connect it to the laptop through a USB micro cable.
# cd BUSSide/Client
# ./busside.py /dev/ttyUSB0
Afterwards you will be greeted by the (pretty straight-forward) BUSSide menu.
Let’s say you have a new target and you cannot figure out which is the pinout of the UART console and you are too lazy to deal with a locig analyzer…
Grab your Bürtleina board, attach those pins to the target either through dupont cables or hook probes and run BUSSide Client. It will allow you to enumerate the RX pin, then the TX one and finally to use the BUSSide itself as UART to USB (i.e. passthrough mode).
At this point you can either continue hunting JTAG pins (if any) or try to dump the SPI Flash (which contains the Crown Jewels. A.k.a. his majesty, the Firmware).
Grab a SOP8 clip or Hook Probes, attach to the SPI Flash and start dumping it. In a couple of minutes you should get extracted the firmware.
Of course, you can always try to also hunt-down the JTAG…
Some of you at this point may have wondered… why there is a CC1101 board attached to BürtleinaBoard?!
Well… look at it as an easter-egg that allows you to do some basic RF Hacking.
Flashing one of the SmartRC-CC1101-Driver-Lib’s examples is very trivial with Arduino IDE.
If you have read so far… means you are thinking to try the BurtleinaBoard! Good! You can find Gerbers, Schematics and 3D Case at https://burtleina-board.whid.ninja
For more stuff feel free to follow https://twitter.com/whid_ninja
As usual I will try convincing the Chinese Manufacturer that brought to life WHID, WHIDelite and FocacciaBoard to start the production of a small batch of BurtleinaBoards for the folks that are too lazy or too scared to make their own. #StayTuned!
If you wonder how looks like a Bürtleina and how to make it, I left here the receipt: https://www.poderecasale.com/en/burtleina/
(SecurityAffairs – hacking, BürtleinaBoard)
About the author: Luca Bongiorni
Luca is working as Principal Offensive Security Engineer and in his spare time is involved in InfoSec where the main fields of research are: Radio Networks, Hardware Reverse Engineering, Hardware Hacking, Internet of Things and Physical Security. He also loves to share his knowledge and present some cool projects at security conferences around the globe. At the moment is focusing his researches on bypassing biometric access control systems, ICS Security and Air-Gapped Environments.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.